Tag Archives: apple

Quick Take: Anker PowerLine II USB-C to Lightning charging cable for iPhone and iPad Pro

Posted on by
Reply

A week or two ago, I wrote about Apple opening the USB-C-to-Lightning cable market up to third parties after a couple of years of lock-in. Today I’m back with a quick update on one of the two cables I’ve seen, in case you’re looking to rapid-charge an iPhone 8 or later, or an iPad Pro, with Lightning.

Anyway, I got the Anker USB-C to Lightning charging cable in last week. It’s now available on Amazon for $15.99 in white or $17.99 in black, although they are rolling in and out of stock.

First look at the PowerLine II cable

The cable is in Anker’s PowerLine II highly durable cable line, rated for 12,000 bends.

Here you see the Anker cable coiled with the Apple cable, alongside three of the USB-PD chargers I tried it out with. The cable is thicker and looks and feels sturdier than the Apple cable. It comes with a Velcro tie to coil the cable safely, which is a nice touch.

Charging sources tested:

Also fully expected to work (but not tested or pictured):

One upside to the Apple chargers is that you can find Apple stores (and other retailers like Best  Buy and Fry’s who sell Apple products) all over the place. In an emergency, you can pick up a charger without waiting for shipping. I had to do this with an 87W charger to keep my Dell XPS 15 9550 running during a trip to Las Vegas a couple of years ago.

Trying out the cable with iPad Pro 12.9″ (2015)

2019-02-21 13.56.58The testing was pretty simple. This time, I used the new Klein Tools ET920 tester (chosen because it has a captive USB-C cable rather than the dongle-style connection of the Plugable and Satechi testers). The tester does not cross the streams, so to speak, so to test USB-C output you have to use the USB-C input (same goes for USB-A).

I plugged the tester’s USB-C input into each of the chargers shown above, connected the Anker Powerline II cable to the output and to the 12.9″ iPad Pro 12.9″ (2015 model), and watched for the voltage bounce.

As you see in the photos, charging started at about 5V/2A, and about 8 seconds later, the voltage jumped to nearly 15V as expected. This was the same behavior as with the Apple cables.

This is not a surprising review or result; Anker does cables well, and the chip that makes the USB-C to Lightning rapid charging possible is licensed from Apple. However, I’d have been hesitant to recommend it without trying it out myself.

Based on my use of the Anker PowerLine II charging cable, I’m comfortable recommending it, and with a number of Lightning devices in the house, I can always use another charging cable.

The Cascade Cables version discussed in the earlier post is expected in April. While they did not yet respond to my inquiry about testing with 28W rapid-charge devices like the iPhone 8 and later, and iPad Pro models with Lightning, it seems likely that they will work. Watch for an update in two months on that.

Have you upgraded your Lightning charging options from the ones that came in the box? Any thoughts or questions on charging options? Share in the comments, and I’ll answer if I can.

 

 

Good news on the USB-C to Lightning front… maybe…

Posted on by
Reply

There are a few power units I’ve been using, testing, and documenting over the last many months. It’s easy to get 5V 2.4A charging, and Qualcomm Quick Charge standards (or Anker’s analogue to them) are pretty easy too. But there’s a somewhat new charging consideration that’s lighting up even more this year, with a possible catch.

When Apple released the iPad Pro (12.9″ 1st generation) in 2015, it was an amazing media consumption and even creation device. Support for the new Apple Pencil for creative types, a huge beautiful screen, and a huge 10Ah 38Whr battery… what’s not to like?

How about charging that huge battery?

Aye, there’s the rub. The iPad Pro came with a 12 watt USB-A charger like iPhones did, and a USB-A to Lightning cable like iPhones did. It’s what Apple had available, and it would probably recharge your iPad Pro in 4-6 hours. (As you can see on the right, mine hasn’t left the box in about 3 years.)

Soon, though, Apple released a USB-C to Lightning cable, which would allow you to charge at about 28 watts (that’s 2.3x as fast on a good day). This cable also opened the door to directly connecting to the new USB-C Macbooks, and with the 30W or better Apple chargers, you could get that 28 watt charge going. Most USB Power Delivery chargers and battery packs at 29 watts or higher can also rapid charge your iPad Pro.

When the iPhone 8 generation came out, Apple started supporting a rapid charge at 18 watts for those devices, and newer iPad non-Pro models (in the last year) have also taken on the faster charge rates.

The catch was, Apple did not sell or license their USB-C rapid charge chips for third party manufacturers. So while some overseas companies made USB-C to Lightning cables, they couldn’t charge faster than the standard USB-A cable, and wouldn’t be MFI-certified. So $19-35 went to Apple for each of those cables, and you got your rapid charging.

You also got typical Apple cable sturdiness (such as it is), which left many people replacing cables and grumbling.

But then, it all changed

Anker USB-C to Lightning Cable

Now that Apple is moving to USB-C for charging their devices, they’re also allowing third party USB-C to Lightning cables by licensing the C89 and similar connectors/chips.

Anker announced one last month at CES, pre-orderable now on their website and shipping later this month, and a crowdfunding project from a company called Cascade Cables is also promising such a cable coming in April.

These new cables are sturdier, potentially more aesthetically pleasing, and the Anker cable is priced lower than the Apple version by a couple of bucks. Now the question is whether these cables will support the full range of charging rates that those of us with larger devices will need.

Cascade USB-C to Lightning Cable

Anker responded to an inquiry on Facebook about the iPad Pro charge rate by telling me that my iPad had USB-C and I could use USB-C to USB-C cabling. Alas, the 2015 iPad Pro doesn’t have USB-C, and they didn’t follow up on the question. However, their pre-order page says it uses USB Power Delivery, which has me feeling optimistic.

I’ve inquired with Cascade Cables as to whether they’ve tested with 28W devices. I’ll update this post if I hear back from them.

It takes more than a cable

With the higher power cabling, whether from Apple or a third party, you’ll need a USB-C Power Delivery charger to negotiate the higher power level.

The easy option is to pick up an Apple USB-C Macbook charger.

If you already have one for your Macbook, you can use it to rapid-charge your iOS devices as well. And note that if you have another USB-C charged laptop (like a Dell XPS 13 or XPS 15, a newer Lenovo, and so forth), you can use the Apple chargers as long as they feed enough wattage to charge your device.

For the third party side, I’ve had very good experiences with Anker, so it’s worth considering a charger from them that provides at least 29 watts on USB-C, like the Powerport II ($30) or Powerport Speed+ Duo ($26). The Powerport II offers up to 19.5 watts on USB-A, which is good for quick-charge devices or iPhone 8 or later; the Speed+ Duo is limited to 12 watts on USB-A.

If you’re patient, Anker has also announced their entry into the GaN (gallium nitride) charging field, the Powerport Atom PD1 charger which gives 30 watts of juice in a tiny form factor. It’s listed on their website for pre-order on Amazon, but Amazon is currently offering email alerts for when it’s available to order. I’ll update when that comes out of unobtanium as well. I have the RavPower 45W GaN charger in house, and will be writing that up soon too.

And if you want to see what power profile your charger is negotiating, regardless of which charger or cable you use, I’ve used the Plugable ($20) and Satechi ($30, right) USB-C power meters with good results. You don’t need a power meter to just charge your devices, but it can be useful to troubleshoot slow charging, flaky cables, or power profile mismatches (like the ones we’ve experienced with the Dell XPS 13 9370).

Where do we go from here?

As the newer cables come out, I’ll be acquiring and testing them. Same goes for the new PD1 charger from Anker. With an iPhone 8 Plus, a 2017 iPad Pro 10.5, and a 2015 iPad Pro 12.9 in the house, rapid charging is an important topic.

I’ll also have some updated coverage on battery packs to rapid charge your iOS devices, and even charge your USB-C Power Delivery laptops. The new HyperJuice “World’s Most Powerful USB-C Battery Pack” and Omni Ultimate battery packs are in house and ready to test, when work lets up a bit.

What are your charging concerns, and what interesting solutions have you found to keep your devices up and running? Share in the comments, or ask any questions you may have.

As always, if you buy through our links above, we get a small commission, which then goes back into buying more stuff to review here and on rsts11travel. We appreciate your support.