If you’ve been around for a while, you will know that POHO, or Psycho Overkill Home Office, is an ongoing theme of this blog. I’ve described it more than twice as “two comma technology on a one comma budget.” It stands to reason that my home network is in the “psycho overkill” range, with three sites connected by VPNs and internal 10 gigabit networking (40 gigabit on its way).
Disclosure: Much of the gear in this post is Cisco Meraki, and much of that was obtained using employee purchase program benefits as a Cisco employee. As a system engineer I was eligible for free renewals on my licenses for the Meraki gear, but the original licenses and most of the hardware purchases were out of my own pocket. Any other gear mentioned was purchased out of my own pocket through mainstream methods (i.e. eBay) unless otherwise noted. Cisco has not reviewed, influenced, or endorsed this post or this blog, and they most likely won’t.
What’s the POHO like today?
In the past two years I’ve been running a somewhat crippled network, despite having pretty good employee purchase benefits at work. Still, with gigabit fiber and 500 megabit cable, I’m at about 2.5x the capacity of my core router.
I’m running a Meraki MX84 as the core of my home network, with AT&T / Sonic fiber as primary, and Comcast as secondary. It downlinks to an MS42p 48-port switch with four ports of 10 Gigabit Ethernet. On the upstream side, it connects via Meraki’s auto-vpn to an MX64 in my shop across town, and to a Z1 Teleworker unit in my garage that keeps some lab gear protected from the world (and simplifies IP addressing).
I have a couple of MS switches around the networks, as well as a Cisco Small Business SG500XG-8F8T, a Netgear MS510TXPP (for mgig POE) and a couple of other brands in use from time to time. Wireless is handled by MR56 and MR34 in the house, MR18 in the garage, and MR16 in the shop.
Unfortunately, the MX84 is limited to 500mbps of stateful firewall or 320mbps of advanced security throughput. I’m getting pretty close to that, but the other half of the uplink is idle unless I switch over to the other side of the MX.Continue reading